Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

超燃冲压发动机燃烧室空气节流技术研究

为考察空气节流对超燃冲压发动机燃烧室的影响,非定常数值模拟和地面实验相结合证实了空气节流可以实现超燃燃烧室燃料稳定燃烧,研究了节流位置、节流流量、节流撤去时间对节流效果的影响。结果表明:在燃烧室入口马赫数2,静温548.8K,静压101555.9Pa条件下,745mm处节流时,激波串稳定时间较短,稳焰失败;875mm处节流时,火焰稳定成功。随着节流流量和节流撤去时间的增加,燃烧越来越剧烈,壁面压力逐渐升高,可能影响进气道的起动,对于本文来流条件,30%入口空气流量作为节流流量是合适的,440ms以前撤去空气节流是恰当的。     

涡扇发动机放气起动分析与试验研究

为进行涡扇发动机放气起动特性的研究,建立了发动机放气起动模型,并进行了仿真计算;为进一步验证放气对发动机起动的影响,进行了发动机放气起动试验,获得了发动机放气起动的特点,定性验证了仿真计算结果;通过多次调整起动供油规律的试验,得到了发动机起动供油边界。计算和试验结果表明:在发动机起动过程中放气可提高发动机的起动稳定性,同时发动机排气温度也有所提高,发动机放气起动供油边界高于不放气起动供油边界,放气起动提高了发动机起动稳定裕度。     

无线电陆空通话英语交际能力模型研究

民航无线电陆空通话语言是以英语为载体的一种空地交流的特殊语言。本文在应用语言学的研究成果之上,提出了该语言的交际能力模型,该模型包括语言能力、策略能力、背景知识和心理生理机制四个部分。笔者结合民航陆空通话实际,对模型各个部分进行了分析,重点解析了策略能力在模型中的核心功能。     

飞行器空中回收

文中详细介绍了飞行器空中钩取的回收方法和空中钩取作业的主要技术关键。     

民用飞机空气起动系统性能评估方法

根据民用飞机起动系统设计特点,分别给出了起动轴功率检查和起动机进口参数检查2种起动性能评估方法,并对2种方法进行了对比,起动轴功率检查方法可以直接反映起动机轴功率的设计状态;而起动机进口参数检查方法可以直接反映出起动关键参数(流量、总温和总压)的设计状态。最后,以某型辅助动力装置供气的起动性能计算为例验证了基于起动机进口参数的计算方法。     

某型导弹控制舱壳体机械加工技术研究

结合生产实践介绍了新一代导弹的重要构件－控制舱壳体机械加工的难点及其工艺总方案的确定，并着重就控制铝合金乐于壁壳体的变形、提高偏心圆加工精度的措施进行了细致的研究，实践证明，该种工艺方法简单、合理，可以为类似的复杂舱体加工提供一条可借鉴的工艺途径。     

凸轮逆序测量方法

目前各杂志所发表的关于凸轮测量的文章，所讨论的均是凸轮的顺序测量方法，有关凸轮的逆序测量(反求工程)方法，尚未见于文字。本文将对凸轮的逆序测量方法进行探讨。     

AEDMS工程文件编号的生成算法

工程文件编号生成算法是国航工程文件管理系统（AEDMS）开发的难点。提出的．工程文件编号生成算法包括．工程文件流水号和改版号的指派算法与自动编排算法。前者解决了新旧系统．工程文件编号的兼容问题；后者是一种新的基于关系代数的自动编号算法，其利用元组序号，具有紧凑简单、可靠性好、可维护性好、执行效率高、适用面广的特点。实算结果和AEDMS运行实践表明，此工程文件编号生成算法是可行的。     

A multi-aircraft conflict detection and resolution method for 4-dimensional trajectory-based operation

Conflict Detection and Resolution(CDR) is the key to ensure aviation safety based on Trajectory Prediction(TP). Uncertainties that affect aircraft motions cause difficulty in an accurate prediction of the trajectory, especially in the context of four-dimensional(4D) Trajectory-Based Operation(4DTBO), which brings the uncertainty of pilot intent. This study draws on the idea of time geography, and turns the research focus of CDR from TP to an analysis of the aircraft reachable space constrained by 4D waypoint constraints. The concepts of space–time reachability of aircraft and space–time potential conflict space are proposed. A novel pre-CDR scheme for multiple aircraft is established. A key advantage of the scheme is that the uncertainty of pilot intent is accounted for via a Space-Time Prism(STP) for aircraft. Conflict detection is performed by verifying whether the STPs of aircraft intersect or not, and conflict resolution is performed by planning a conflict-free space–time trajectory avoiding intersection. Numerical examples are presented to validate the efficiency of the proposed scheme.